Marine environments present challenges such as corrosion from seawater and mechanical stress due to pressure and motion. Monel K500 pipes and tubes are a revolutionary solution for these issues, offering long-lasting performance.
Corrosion Resistance:
Monel K500’s resistance to chloride-induced corrosion makes it highly effective in seawater applications. It is used in seawater valves, propeller shafts, and marine pump components, where prolonged exposure to saltwater would otherwise lead to material degradation.
Strength and Durability:
Monel K500’s high strength allows it to withstand the mechanical stresses of marine operations. Whether in offshore drilling platforms or ships, Monel K500 components provide reliability in demanding conditions.
These are used in cable wraps, marine equipment, submarine parts, valve trays and electronic components. Navneet Metal Corporation is an essential maker of these Monel K500 Subtleties in different sizes and types.
The Pipes go under the ASTM B163 and ASTM B165 specifications. These particulars follow the ASTM, ASME, and API standards point rules. The levels of the Monel K500 Tube range from 15 NB to 150 NB, with the thicknesses going from 0.6mm to 20mm. The external width of the Tubes ranges from 6.35mm to 254mm. The UNS N05500 tubing can come in various lengths, for example, single sporadic, twofold capricious, or slice-to-length sizes. The terminations of the Pipes can shift. Pipes can be straight, skewed, or wandering. There are, unsurprisingly, ERW, welded, and made pipes.
The K500 Monel Seamless Pipe has less through-and-through brutality and is correspondingly more exact than different sorts of Pipes. In this way, the Pipes can be round or strain-driven in structure. The chemical composition of the material has 63% nickel, 27% copper, titanium, iron, silicon, manganese, aluminium, and carbon. This development gives the ASME SB165 Monel Welded Pipe 790 MPa of least yield strength and 1100 MPa of least resoluteness. The softening spot of the Pipes is also high at 1350 degrees Celsius. This suggests that the Pipes can work at high temperatures. Please go ahead and connect with us for extra data on various things, like the K500 Monel Composite ERW Pipe and the costs.
Monel K500 Pipes & Tubes In Mumbai, Monel K500 Pipes & Tubes Manufacturers in Mumbai, Monel K500 Pipes & Tubes Suppliers in Mumbai, Monel K500 Pipes & Tubes Stockists in Mumbai, Monel K500 Pipes & Tubes Exporters in Mumbai
Equivalent Grades Monel K500 Pipes & Tubes
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
|---|---|---|---|---|---|---|---|
| Monel K500 | N05500 | 2.4375 | – | – | – | – | – |
Monel K500 Pipes & Tubes Specification
| Specifications | ASTM B 163 ASME SB 163 / ASTM B 165 ASME SB 165 |
|---|---|
| Dimensions | ASTM, ASME and API |
| Size | 15″NB TO 150″NB IN |
| Specialized in | Large Diameter Size |
| Range | 6.35 mm OD upto 254 mm OD in 0.6 TO 20 mm thickness. |
| Type | Seamless / ERW / Welded / Fabricated |
| Form | Round, Hydraulic Etc |
| Length | Single Random, Double Random & Cut Length. |
| End | Plain End, Beveled End, Treaded |
Chemical Composition of Monel K500 Pipes & Tubes
| Monel K500 | Ni | C | Al | Mn | Si | Fe | Cu | S | Ti | Cr |
|---|---|---|---|---|---|---|---|---|---|---|
| 63.0 min | 0.25 max | 2.3 – 3.15 | 1.5 max | 0.5 max | 05 – 2 | 27.0 – 33.0 | 0.010 max | 0.35 – 0.85 | – |
Mechanical Properties of Monel K500 Pipes & Tubes
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
|---|---|---|---|---|
| 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 1,60,000 , MPa – 1100 | 20 % |
The Stainless Steel 304L Sheets and Plates are enduring and can fit into any length with no burden and it is open in various shapes and sizes. The Padmavati Steel & Engg.Co. is a standard, exporter and provider of SS sheets and plates and this thing is utilized in different relationship for various applications. It is dealt with by national in like way as expansive standards.
The SS sheets and plates of appraisal 304L come in ASTM A240/ASME SA240 standard. The thickness of SS Plates/Sheets is extending from 3mm to 20mm. It comes in different fulfillments, for example, hot moved, cold rolled and others. These are given in different structures, for example, plain sheet, shim sheet, Designer sheet, checkered plate, and so on. It comes in another inside and out that truly matters ambiguous standard, for example, UNS 30403, JIS 304L, BS 304S11 and others. Before dispatch last result to the customer, it is familiar with different tests to guarantee its quality.
Stainless Steel 304L Sheets & Plates Manufacturers, Stainless Steel 304L Sheets & Plates Exporters, Stainless Steel 304L Sheets & Plates Suppliers, Stainless Steel 304L Sheets & Plates Importers, Stainless Steel 304L Sheets & Plates Stockists, UNS S30403 Stainless Steel 304L Sheets & Plates
The tempered steel of examination 304L offers assorted basic highlights like great, high bore, and long connection life. These sheets and plates unavoidable consequence of SS are made by top quality grungy material and are supply wherever all through the globe. The Ss 304 L plates and sheets are proposed to meet the particular necessities of the clients. These SSs things are made particularly for high risky and high warmth catch applications.
Padmavati Steel & Engg.Co. is Manufacturing and Exporting of extraordinary treated steel sheets, tempered steel plates, in thickness of 0.3mm to 120mm. That have discovered extensive applications in different Industries. We in like way plan in Nickel and copper compound, Stainless and Duplex Steel, Carbon and Alloy Steel, are the materials which are utilized for masterminding of sheets and plates.
STAINLESS STEEL 304L SHEET AND PLATE SPECIFICATION
Standard : ASTM / ASME A240 / SA240
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness :0.01 mm to 250 mmThk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc