A Steam Trap is an integral part of a steam system. Steam traps play an important role in maintaining the productivity and efficiency of the steam system. This exhaustive guide answers all the questions one might have about steam traps, their working principles, troubleshooting, etc. Steam traps an automatic drain valve which distinguishes between steam and condensate.

A steam trap holds back steam & discharges condensate under varying pressures or loads. The steam traps should have a good capacity to vent out air and other non-condensable gases quickly while holding back the live steam.

Bliss Flow Systems is a diversified supplier of Engineering products to Chemical, Petrochemical, Oil & Gas, Marine, Off-Shore Platform, Power Generation, Water and Waste Water industries, etc. We distribute the Measuring equipments, Heat transfer equipments, Safety devices, Filtration equipments, Valve automation systems, Condition monitoring systems, Pipes, Plates, Bars, Fittings, Pipeline components and many more …

Our range of products include gauges, switches, transmitters, electric heaters, heat exchangers, flame arresters, rupture discs, rupture pin valves, safety relief valves, strainers, manual / automated valves, solenoid valves, positioners, gas regulators, choke valves, mist eliminators, vibration transmitters, vibration switches, dampers, expansion joints, pipes, tubes, fittings and many more.

Working Principle:

Energy is getting more important day by day. According to the diminishing of energy sources all the industry sectors searching for alternative sources for increasing productivity. In this case, steam which is one of the energy carriers is also getting more important. Trapping of steam and using more heat of steam is up to choosing the right steam traps. Although steam traps look simple and small their obligation is very complex. Saving more energy is related to the right chosen steam trap type and size. Working principles should be known well for choosing the right steam trap for the process.

TYPES

Mechanical Trap: This range of steam traps operates by sensing the difference in density between steam and condensate. Sub Groups are Bucket type, Open bucket, Inverted bucket with lever, without lever Float type, Float with lever, Free float

Thermodynamic Trap: This range of steam traps operates by sensing a difference in thermodynamic properties between steam and condensate. Thermodynamic steam traps rely on the fact that hot condensate, released under dynamic pressure, will flash off to give a mixture of steam and water. Sub Groups are Disc type Impulse type Labyrinth type Orifice type

Thermostatic Trap: This range of steam traps operates by sensing a difference in temperature between steam and condensate. Sub Groups are Bimetallic-type Metal expansion types

We are distributors of Mechanical, Electrical, Instrumentation and Control Products.
Bliss Flow Systems proudly represents the reputed manufacturers from India, USA, Europe and South Korea.

Advantages

Efficient steam trapping will result in optimum efficiency and will achieve the following:

1. Fast heat-up of heat transfer equipment
2. Maximum equipment temperature for enhanced steam heat transfer
3. Maximum equipment capacity
4. Maximum fuel economy
5. Reduced labor per unit of output
6. Minimum maintenance and a lo

Middleeast valve is the biggest  Steam trap supplier in UAE. We supply to cities like Masafi, Fujairah, and Ajman.

A steam trap is a device used in steam systems to discharge condensate (the liquid formed when steam condenses back into water) while preventing the escape of live steam. It serves an essential role in maintaining the efficiency and functionality of steam distribution systems by removing unwanted condensate and preventing steam wastage.

The primary function of a steam trap is to allow condensate to be removed from the steam system while blocking the passage of steam. Condensate can accumulate in steam distribution lines due to the cooling of steam as it travels through pipes. Accumulated condensate can hinder the proper functioning of steam-operated equipment, reduce energy efficiency, and even cause damage to the system. Steam traps help maintain proper steam pressure and prevent condensate buildup, ensuring the system operates optimally.

The working of a steam trap depends on its type. However, in general, a steam trap operates as follows:

• Opening Phase: As condensate accumulates in the system, the trap’s mechanism is triggered to open the valve. This allows the denser condensate to pass through while preventing the lighter steam from escaping.
• Discharge Phase: Once the condensate has been discharged, the trap’s mechanism closes the valve to prevent steam from escaping. The trap remains closed until the next cycle of condensate buildup occurs.
• Cycle Repeats: The trap cycles between opening and closing based on the presence of condensate. Different types of traps have specific mechanisms that enable this cycling process.

Suppliers of Steam Trap in the UAE offer a diverse range of types, each meticulously engineered with unique mechanisms. These mechanisms are tailored to ensure the efficient elimination of condensate while concurrently guarding against any unnecessary loss of steam.

Description

Body Material: Carbon steel, Ductile iron, Stainless steel (SS304, SS316), Cast iron, Forged steel (A105, F11, F22)

Size: 1/2″ to 2″

Nominal Pressure: PN10 to PN250

Class: 150 to 300

Types of steam trap:

• Thermostatic steam trap
• Thermodynamic steam trap
• Inverted bucket steam trap
• Bimetallic steam trap
• Ball float steam trap

Advantages of steam traps:

• Improved system efficiency
• Prevention of water hammer
• Reduced maintenance
• Increased system lifespan
• Improved product quality

Parts

• Valve Body
• Valve Mechanism
• Thermostatic Element
• Cover
• Disc
• Strainer Plug
• Insulation Cap

Industries which use them

• Power Generation Plants
• Oil and Gas Industry
• Pulp and Paper Industry
• Textile Industry
• Chemical Industry

Visit us: https://www.middleeastvalve.com/product-category/steam-trap/