✨Bliss flow systems Flame Detector Supplier & Distributor in UAE. We are distributors of Mechanical, Electrical, Instrumentation and Control Products.
A flame detector is a type of sensor that can detect and respond to the presence of a flame. These detectors have the ability to identify smokeless liquid and smoke that can create open fire. For example, in boiler furnaces flame detectors are widely used, as a flame detector can detect heat, smoke, and fire. These devices can also detect fire according to the air temperature and air movement. The flame detectors use Ultraviolet (UV) or Infra-Red (IR) technology to identify flames meaning they can alert to flames in less than a second. The flame detector would respond to the detection of a flame according to its installation, it could for example sound an alarm, deactivate the fuel line, or even activate a fire suppression system.
Themajor component of a flame detector system is the detector itself. It comprises of photoelectric detective circuits, signal conditioning circuits, microprocessor systems, I/O circuits, and wind cooling systems. The sensors in the flame detector will detect the radiation that is sent by the flame, the photoelectric converts the radiant intensity signal of the flame to a relevant voltage signal and this signal would be processed in a single chip microcomputer and converted into a desired output.
What are the types of Flame Detectors are there and how do they work?
Ultra-Violet (UV)
This type of flame detector works by detecting the UV radiation at the point of ignition. Almost entirely all fires emit UV radiations, so in case of the flame, the sensor would become aware of it and produce a series of the pulses that are converted by detector electronics into an alarm output.
Infra-Red (IR)
The infra-red flame detector works by checking the infrared spectral band for certain ornamentation that hot gases release. However, this type of device requires a flickering motion of the flame. The IR radiation may not only be emitted by flames, but may also be radiated from ovens, lamps, etc. Therefore, there is a higher risk for a false alarm.
UV-IR
This type of detector is capable to detect both the UV and IR radiations, so it possesses both the UV and IR sensor. The two sensors individually operate the same as those described, but supplementary both circuitry processes signals are present due to there being both sensors. Consequently, the combined detector has better false alarm rejection capability than the individual UV or IR detector.
Before selecting a detector type, it is important the designer understands the application. Things to consider include:
Presence of false alarm sources
Is there anything that may cause the detector to alarm without a genuine fire being present? The most obvious source of an unwanted alarm is a flare, but engines or turbine exhausts should be considered too.
Operating conditions
What environmental issues may exist? Rain, snow, salt spray, sand and dust storms, the list can go on.
Maintenance and function testing
Flame detectors require routine testing and may need periodic maintenance in atmospheres containing high levels of contamination. If possible, access should be available without the need for scaffolding, although this is not always possible.
Area classification
Are the units to be installed in a hazardous area? If so, ensure the products are certified accordingly.
Diagnostics capabilities
Increasingly, flame detectors are being specified with additional communication capabilities such has HART. If the control system supports HART, check to see if the flame detectors you wish to specify provide information for planned (preventative) maintenance, not just indications of faults that have occurred.
No matter what type of flame detector you install, regular maintenance and testing are critical for ensuring reliability and accuracy. Best practices for optimal performance include:
© 2024 Crivva - Business Promotion. All rights reserved.